Woodpecker DTE D7 Ultraschall Spécifications du fabricant

Zahnsteinentferner Ultraschall Produktdetails:

1. abnehmbares, steriliesierbares Handstück

2. scaling, perio, endo

3. 2 facher Wasser anschluss: automatischer Wasser anschluss und Wasser anschluss von außen

Computer steuerbar

4. Inkl. Ansatz Spitzen und Spitzenhalter



Technische Details:

Power Input: 100V-240V~50Hz/60Hz 1.2A (max)

Main Unit Input: 30VDC 1.3A

Output primary tip vibration excursion≤100μm

Tipp vibration Frequency: 28kHz±3kHz

Output half-excursion force<2N

Output Power: 3W~20W

Main unit fuse: 250VT 1.6AL

Adapter fuse: 250VT 2.0AL

Water Pressure: 0.1bar to 5bar (0.01MPa~0.5MPa)

Main Unit Weight: 1.35kg

Adapter Weight: 0.3kg

Dimension: 237mm*206mm*95mm

Siehe Details:http://www.oyodental.de/

How to Choose The Proper Electric Toothbrushe

What is the best electric toothbrush out there? Why should you buy an electric toothbrush in the first place? Well let’s start with why you should be using an electric toothbrush. One of the biggest reasons to use an electric toothbrush is that these toothbrushes do the best job of cleaning your teeth and gums. They get in between your teeth, removing plaque and debris. They also gently massage your gums, promoting good tooth and gum health. In addition, electric brushes also save you a lot of time when brushing your teeth. Dentists recommend that you brush your teeth at least two minutes per brushing, but this is often not enough to completely clean. With an electric toothbrush, you are sure to get clean in the amount of time.(ultrasonic scaler)

While these are important factors when choosing the best electric toothbrush, it is also important to choose the right head itself. You have many to choose from, but the basic heads are soft, medium, and hard bristle heads. People with sensitive teeth and gums, as well as children should start off with a soft bristle head, because they are going to be gentle, but still do a quite effective job. They also make heads for whitening your teeth, as well as deep cleaning. It is important to check the brand of toothbrush to make sure which replacement heads are available.

You may have the best electric toothbrush in the world, one that is expensive, and has all the bells and whistles, but in the end, if you can’t work it, then it’s just an expensive and fancy paperweight. So really the bottom line is find a toothbrush that will be the easiest for you and your family to use, and use regularly. You should choose a toothbrush where the heads are interchangeable, so you don’t have to buy a base for everyone in the family. The heads should be color coded so you know who’s brush head is who’s. While some people may want to just have healthy teeth, there are people who don’t like the look of their smile, maybe they smoke or drink coffee, so a good toothbrush product should be able to accommodate these types of heads as well.

One thing for sure is that you need to really check around for the right price and the features you need. Make sure you find a product that you are going to be comfortable with for a long time. It is also important that they offer replacement heads at a reasonable cost.

Related goods:(teeth whitening machine)

 

Simple Methods to Make Teeth Whiter

You can get whiter teeth without spending too much time or money. This article contains many tips and tricks to ensure that you successfully whiten your teeth.

Fresh cut lemons are great for whiter teeth. Rub the lemon peel onto your teeth every day for a whiter smile. Lemon peels will give you white teeth without the harshness of chemicals.

You need to be very careful when eating or drinking after having a whitening of the teeth procedure done. Teeth absorb stains more easily after they have been whitened. It is important to avoid dark colored foods and drinks after your newly whitened teeth. Coffee is an example of something that can be absorbed by your teeth.

Eat raw veggies and fruits or vegetables if you want to see whiter teeth. Stay away from these kinds of food to ensure your teeth are healthy teeth. You should also avoid snacking on an ongoing basis if you want to keep your teeth to be white.

Whitening Products - dental led whitening machine

Read the directions on any whitening products completely before starting treatment. This can irritate your gums and damage your teeth. Do not use whitening products designed to whiten your teeth.

While mouthwashes are great at fighting bacteria, they can also result in discoloration of your teeth. To avoid discoloring your teeth, pick a brand that is gentle and does not have bright coloring.

This helps you fight plaque buildup so your teeth do not become discolored.

It also can make them very sensitive teeth that are more susceptible to staining.

Red Wine

Red wine has a very negative effect on teeth look. The deep hues of red wine color is absorbed into the teeth’s enamel and discolor them. The only way to permanently stop this is by reducing the amount of red wine completely.

Talk to a tooth whitening process. Do not whiten your teeth after getting checked for cavities or any dental work.

If the shade of your smile bothers you, the first thing you should do is speak to your dentist about all available options. Some feel that it’s wasteful to spend money on teeth whitening, but if it is affecting the quality of your life, it may be worth it because it could build up your self-confidence.

Drinking water after dark beverages can keep your teeth. A glass of water taken after drinking coffee or tea will keep their stain-causing agents from remaining on your teeth long enough to do any damage. You can also try drinking those dark drinks from a straw.

Twice a day, you should be brushing, floss, and massaging your gums. The most reliable way to ensure your teeth are white is to simply brush and floss every time you eat or drink anything. This ensures removal of food residue and plaque that builds up and cause any damage.

Brush your teeth upon waking up, and as soon as you want to go to bed to see your teeth get whiter.

You will enjoy life more with a bright, white, dazzling smile. You will be glowing with self-confidence and a bright smile without even knowing it. Start implementing these tips and hints to get bright, white teeth and the smile you always dreamed of having.

Looking for more dental equipment at oyodental.com

Mobile Zahnarzt Behandlungseinheit Spécifications du fabricant

Mobile Dentaleinheit | Mobile Zahnarzt Behandlungseinheit 

Produktsdetails:

1. 3 Handstück automatische Steuerung

2. Einzeln-Handstück Kühlmittel System..

3. Handstück Spülsystem

4. Aseptische Handstückschläuche

5. 3-Weg-Luft / Wasser-Spritze, Nass / Trocken- Fußschalter, Meister Ein/Aus-Schalter

6. Duplex Steckdose, Feststoffe Sammler

7. Anschlussdose mit Ventilen, Filter & Regler

Technische Details:

1. Hydraulischer Druck:0.3MPa

2. Luftdruck: 0.35MPa

3. Eingangsleistung: 0.8MPa

4. Ausgangsleistung: 0.5MPa

5. Abmessung: 85 x 70 x 65 cm

6. Gewicht:26kg 

Mehr sehen:http://www.oyodental.de/

Simple and Useful User Manual of Dental Lab Vacuum Forming Machine

Here is the Manuel for one of dental lab equipment, Vacuum Forming & Molding Machine. 

1. The Main Function

The products are mainly applied to plastic molding manufacture, safe and reliable diaphragm, hospitals, clinics, is necessary dental equipments. The machine will with stand years of rigorous use. 

 

a) Heavy-duty vacuum motor provides precise downward suction.

 

b) Power: 1000w

 

c) Weight: About 6kg.

 

2. Vacuum Forming Machine Instructions

 

1) First, both sides will be forming slice protective tear.

 

2) Then, the shaping pieces and place in molding clamping, lifting and heating. Will fix good model machines on the plate.

 

3) If the model is too high, in the model, the convenient take on the steel ring when diaphragm is caused by model pull liter damage

 

4) The machine will open outward heater heating switches, preheated. About 3 minutes.

 

5) The heater to preheating after turn head, waiting for molding slice shape piece prolepses (heat to sag) 1 centimeter or so. The deeper depression, maintain (will be more thin).

 

6) The bars will go down in shaping slice completely cover the model, close heating switches, open vacuum switch.

 

7) After switch button suction pump air time for 5 seconds. Remove diaphragm, heater cool down after it.

 

8) With scissors will spare trimming, or direct transport needle under the drain flange 3mm 2 ~ the grinding, dressing edge, retain gum margins under 0.5 mm.

 

9) Braces clip is completed, will put braces, again, check whether the model. So keep it made with TMJD, if feel edge is not closed, can use alcohol lamp baking, bent inwards, until closed.

 

3. Attention

 

 When heated, the heater to head to prevent the diaphragm heating outward.

 

 Please turn off the heat when vacuum switch, in order to prevent the diaphragm

 

 Please put the vacuum forming on the bench in place, prevent caused by uneven workbench the diaphragm is uneven.

 

 Please keep the working environment clean and tidy, this equipment is mandatory absorb, shall ensure that the bottom and prevent dirt and ventilation equipment, entering the internal equipment can not work normally.

 

We can offer many Manuels for our Vacuum Forming Machine, welcome to ask for it.

Some Notice For Dental Ultrasonic Scaler DUS-2A

We think Notice for DUS-2A dental ultrasonic scaler is also so important, please pay attention to this!


1 OPERATION NOTICE
a) Autoclave Sterilization is recommended
b) Autoclave Sterilization required first time you use and after each patient as noted below. Take handpiece out of packing bag before sterilization. ONLY Tip, Endo Wrench can be autoclaved under the high temperature and pressure.
c) Please release the scaler tip while pushing the foot pedal.
d) The scaler tip should be firmly tightly and has water output from it
e) The scaler tips should be replaced when it is over wear.
f) Please do not bend or polish the scaler tip
g) Please use pure water for our Ultrasonic scaler
h) If use water bottle to contain pure water, the water bottle should higher than patient’s head for over 1 meter at least.
i) Before install the handpiece, please ensure the cable connector side and cable socket side dry enough.
j) Please do not Pull on the tail line during the operation process in order to avoid the handpiece depart from the connector of cable.
k) Please do not beat or polish the handpiece
l) After the machine finished operation, please turn off the power and then pull out the adapter.
m) Our company is a professional manufacturer for medical devices, we are responsible for all the machines repair and modify as well as spare part replacement.
n) Other factory produced scaler tip may cause the damage of our ultrasonic scaler, please use scaler tip according to DENJOY scaler tip
o) Our machine only accept the power adapter provided by DENJOY DENTAL.

2 CONTRAINDICATION

a) Hemophilia patients can’t use the machine
b) When there is a patient or doctor who is now using the cardiac pacemaker, is forbidden to use this machine
c) The cardiac pacemaker sufferer, pregnancy. the serious cardiac pulse abnormality sufferer and children is forbidden to use this machine.

3 STORAGE AND MAINTENANCE

a) Please handle with care to our ultrasonic scaler, store it at dry environment.
b) Please don’t Storage with toxic, corrosive, flammable, explosive products
c) Environment storage should be not over humidity 80%,atmospheric pressure is 50 kpa-106 kpa, temperature -10 ℃〜+50℃.
d) When the machine is not in use, please turn off the power and pull the power socket, if not use the machine for long period, please charge and use the machine with water at least once each month, each type for 5 minutes at least.
e) Working life span of our machine is 5 years after machine leave our factory.

4 TRANSPORTATION

a) Please avoid too much Shock and vibration, handle with care and avoid inversion during the transportation
b) Do not ship together with dangerous product.
c) Keep away from moist

Marathon Micro Moteur S10 avec pièce à main 35000 RPM

Marathon S10 35000 RPM Micro Moteur avec pièce à main

 

Caractéristiques:


1.    Le S10 micro moteur dental est composé de la boîte de contrôle, le pédale de pied et la pièce à main.
2.    Type: SJK S10
3.    Très haute puissance et bonne qualité, fabriqué en Corée du sud par SAEYANG.
4.    Virture du produit : méthode exchange d’outil de CAM.
5.    Non vitesse d’étape (il est bien conçu pour la sortie de 0-35 000 rpm).
6.    Capacité de rotater à gauche ou à droit.
7.    Pédale de pied ON / OFF, et il peut aussi contrôler la vitesse de rotation.

4 Simple Steps to lubricate dental low speed handpiece

Lubrication of the dental delivery unit’s hand pieces is necessary to keep them in good working condition. The procedure described below takes only a few minutes per day and should be done in order to avoid overheating of the dental low speed handpiece, which is not covered by the warranty. Oil in either a bottle or in a spray format can be used.

Step 5

Re-assemble and operate the handpiece for 10 seconds, then wipe clean the excess oil on the exterior of the dental handpiece. After these steps, it is ready to use.

A simple Introduction of teeth whitening

Currently, cosmetic teeth whitening or teeth bleaching is performed, either in a dental office or by an independent entrepreneur, by placing a peroxide-based bleaching gel into direct contact with the dental hard tissues. This contact of bleach to teeth is facilitated either by painting the gel directly onto the teeth or by use of a custom made whitening tray loaded with bleaching gel that is placed into the mouth to carry the gel and keep it held in constant contact with the outer surface of the teeth. It has been shown that these two methods will result in noticeable whitening of the teeth, with the finished degree of whitening being based on both the relative strength and concentration of the peroxide-based gel and the amount of time that the active gel is left in contact with the surface of the teeth. If the concentration was low, a longer amount of time of contact with the bleach was needed to achieve a satisfactory result. This meant that for the patient a number of daily treatments were needed either in the dental office or at the patient’s home for the teeth to become satisfactorily white.

Making the bleach concentration stronger, on the other hand, would speed the color change, but would often lead to increasingly painful tooth sensitivity, which was a very non-desirable result for both the patient and practitioner. So, experience showed that a good result could be obtained at home if the patient used either a medium peroxide concentration of bleaching gel coupled with a regimen of spacing the treatments into an hour per day for a number days to a week, or to all-night bleaching with a low peroxide concentration gel every night for a 7-21 day course of treatment. These two variations of the teeth bleaching processes have been used for many years with a good and predictable outcome for the patient who actually correctly completes the treatment regimen.

The only downside was that results were not immediately obtained, but were gained incrementally over a number of days or weeks. Since this type of treatment was done unsupervised at home, strict compliance with treatment guidelines was many times hard, if not impossible to maintain, and results and patient satisfaction with the treatment were many times negative.

Therefore, many a practitioner hoped for a way that could combine the shortest course of treatment, coupled with the ability to be able to supervise the entire treatment to a satisfactory conclusion, that was both easy and pain free from sensitivity to the patient.

This hope resulted in what is now known as Chairside Power Bleaching, the system used by SmileLABS™. By combining a higher concentration of peroxide gel with the use of a strong, safe wavelength of light as an accelerator or catalyst to the teeth bleaching reaction, a much shorter time of contact between gel and tooth resulted that increased the bleaching efficiency of the gel and shortened treatment time by a very large factor, while keeping the process mostly free from sensitivity and achieved the patient’s desire of whiter teeth in minutes instead of days. The question is now whether that combination of gel and light really works.

Related goods:
teeth whitening machine

What Is The Procedure of Dental Sealants?

What Are Dental Sealants?

Dental sealants (also called fissure sealants) are a plastic coating which is placed on the surface of the molar teeth.  Dental sealants are usually placed on the biting surface, but they may sometimes be needed on the cheek or tongue side of the teeth if there are pits there.

Why Should My Child Have Dental Sealants?

Dental sealants are placed to prevent food and plaque from getting stuck in the pits and fissures of the teeth and causing decay.  The grooves of the teeth are difficult to clean and are susceptible to decay.  The material used in dental sealants is flowed into these pits and fissures creating a smoother surface, which is easier to clean with a toothbrush.  Dental sealants reduce the risk of decay and needing fillings by putting a barrier between the surface of the teeth and the plaque.  Some sealants also have fluoride in them which helps to strengthen the teeth.

What Age Should Dental Sealants Be Placed?

Dental SealantsDental sealants should be placed soon after the teeth come through.  Once the new teeth are completely through the gums, this is the best time to have the sealants placed.  They are generally placed during 6 ad 14 years of age.  During routine dental visits, your dentist will advise you on when and if dental sealants should be placed.

How Long Do Dental Sealants Last?

Dental sealants can last up to 10 years.  The sealants can chip or wear away.  The sealants can be repaired or replaced if required.  Your dentist will check your sealants at your regular 6 month checkup appointment.

What Is The Procedure For Placing Dental Sealants?

Applying a dental sealant is a quick and painless procedure.  The teeth are thoroughly cleaned and dried.  The sealant material is then placed on the teeth and it is set with a Led curing light.

Related Article:Is The Dental Curing Light Dangerous Or Harmful To Look At?